mAh Series Cooling Tower PVC Fills

• Cooling Method: Cross Flow
• Ventilation Mode: Natural Ventilation
• Material: PVC
• Air Contact Form: Wet and Dry
• Air Contact Way: Open
• Tower Shape: Square
• Model NO.: crossflow Fill
• Noise Level: Low
• Application Fields: Industrial
• Certification: ISO, CE, CTI
• Condition: New
• Transport Package: Woodencase 20gp/40gp Container
• Specification: 1220 x 1854mm
• Trademark: newin
• Origin: China
• HS Code: 8419909000
• Production Capacity: 5000000/Year

Product Description

MAH Series Cooling Tower PVC Fills

FEATURES

* Applicable for cross flow type cooling towers
* Hanging or glue is available
* Incorporates highly efficient cellular drift eliminators, intergrally molded within the fill sheet
* Louvers are also integrally molded within the fill sheets preventing water from escaping and assuring precise air distribution throughout wide variations in airflow
* Thermoformed from PVC with a flame spread rating and considered self extinguishing

 

PROPERTIES 

With different request in MAH film fill, like length and width, materials or thickness, etc, please inform us your detailed request to get correct solution and offer. Newin could cover all customer requirements. Fill media in flame retardant or anti-bacterial execution are also available on request.

Module Length (Max)			mm	3708
Module Width			mm	760/915/1020/1220/1520
Module Depth			mm	-
Flute Height			mm	19
Flute Corrugation Angle			degrees	-
Surface Area			m2/m3	150
Sheet Thickness - Before Forming			mm	0.38
Sheet Thickness - After  Forming			mm	0.35
Max. application temp. (short time) - PVC			°C	60
Max.operating temp. (short time) - High temp.			°C	80
Customized size and thickness available for special request. Contact Newin for details.

 

STRUCTURE & INSTALLATION DRAWING

Newin supply structure & installation drawing advice with jobsite storage advice and quality control report along with shipment to make attention to customers when they receive the materials. OEM or special mold design also available on request.

APPLICATION & USAGE

Newin MAH Film Fill is applicable for replacing cross flow cooling tower series of NC, NX,QUADRA FLOW, AQUATOWER, AV, 600 Field Erectedother, with SGS test in ASTM Standards to keep high quality infill to get the high efficienty of cooling tower. Inform us the tower model or size, we will estimate the Nos of sheets needed for your cooling tower replacing.

 

APPLICABLE COMMERCIAL STANDARDS

Sheets material is strictly followed below SGS test with ASTM standards. Each property or all properties as below tested by your products are also vailable on request.

Property	Test Method	Values
Specific Gravity	ASTM D792-13 Method B	1.426g/cm3
Oxygen Index	ASTM D2863-13	34.50%
Tear Strength	ASTM D1004-13	X direction		111 N
		Y direction		121 N
Tensible Test	ASTM D 882-12	Tensile Strength	X direction	51.1 MPa
			Y direction	45.3 Mpa
		Elongation at Break	X direction	87%
			Y direction	56%
Values shown above based on SGS Test No.: GZIN1708039662PS by Newin
Statements and methods presented are based upon the best available information and practices  known to Newin. Conditions of use may vary and are beyond control, the user should undertake  sufficient tests to determine the suitability for any intended use of the material.

  

FILED DATA FOR CROSS FLOW FILM FILL REPLACEMENT

Fill in below measurements data for your maintenance cooling tower or reparing projects demand quality and reliability, count on Newin, site visit or maintenance service, engineered to fit the cooling tower fills or components.