NEWIN NST-FRP series full FRP sewage cooling tower
NST-FRP series full FRP cross flow industrial type cooling tower specially designed to application in corrosive liquid cooling process , like sewage water cooling process, sea water, chemical fluids, wood industial, steel plant water, waste water treatment etc.
Features
- Stronger full FRP instructure with excellent corrosion resistant, long service life under sewage water conditions with good durability.
- Heat exchange parts adopt FRP material "L" type splash fills, non-clogging and high corrosion resistant.
- Cross flow open type system, cool dry air fully enter the splash fills parts on both sides of the tower which is continously wet by spray system, ensure efficient heat exchange.
COOLING TOWER PARTS
1. Axial Flow Fan
Efficient axial flow fan drive system, take away the hot saturated discharge air produced during the heat exchange.
2. NFS Fan Stack
NFS fan stack is SMC-molded and made of FRP material, improves the uniformity of the tower air flow, reduce air flow resistance, and ensure that the fan runs in an efficient working area.
3. Spray System
NS005 nozzles are densely installed on the hot water basin, gravity water distribution, evenly spray water.
4. FRP Air Inlet Louver
Ensure cool dry air evenly sucked in and passed through the FRP heat exchange layer, Limiting sun exposure and microbial growth.
5. NLF "L" Type Splash Fills ( FRP heat exchange layer)
Adopts high corrosin resistant FRP material, " L" shape design ensure non-clogging, multi-layer installation ensure high thermal transfer performance.
6. MBD PVC Drift Eliminator
MBD drift eliminator is side mounted inside the tower, next to the NLF fills, efficiently remove the exhaust air flow entrained water droplets, ensure heat tranfer efficiency.
7. FRP Casing
Adopts FRP corrugated plate, high strength, corrosion resistant and nice appearance.
Product Parameters
| Model |
NST-F-1000L-DW |
9500mm (L) |
7560mm (W) |
5950mm (H) |
| Construction |
Frame |
Casing and Louvers |
Maintianence plateform, Ladders |
Infill support |
| F.R.P. |
F.R.P. |
F.R.P. & HDGS |
F.R.P. |
| NLF series Fills |
Type |
Material |
Placement |
Operation temperature |
| "L" type Splash fills |
F.R.P. |
Hang up |
below 60ºC |
| Water Distribution System |
Type |
Nozzles |
MBD series Drift Eliminator |
Type |
Material |
| Gravity type from Top Basin |
PP material NS005 nozzle |
Cellular type |
PVC |
Fan
(Dia. 3000mm) |
Type |
Blades material |
Hub material |
Drive shaft material |
| Axial flow |
Aluminum alloy |
HDGS |
SUS |
Motor
(60kw) |
IP grade |
Class of insolation |
Gearbox Reducer |
Fix type |
Service factor |
Vertical type
( TEFC) |
IP55 |
F |
vertical |
2.0 |
Above performance parameter for reference is base on the following working condition:
Entrance temp. t1= 45ºC Leaving temp. t2= 35ºC Atmospheric pressure P0= 9.94 x 104 Pa
Dry bulb temp. tDB= 32.5ºC Wet bulb temp. tWB= 29ºC
* Cooling Tower Selection is base on the actual working condition. |
Application
NEWIN Full FRP Industrial type cooling towers widely applicated in corrosive liquid cooling process , like sewage water cooling process, sea water, chemical fluids, wood industial, steel plant water, waste water treatment etc.
NEWIN Manufacturing Base
NEWIN FACTORY covers an area of more than 10,000 square meters.
Cooling Tower Workshops: sheet-metal workshop/ welding workshop/ heat exchange coil workshop/ cooling tower assembly workshop.
Cooling Tower Infills Workshops: Fills production and Adhesive workshop workshop.
NEWIN COOLING TOWERS:
·
NWN/ NWF/ NCFN Closed Type Cooling Tower Series
·
NSH/ NST Open Type Cooling Tower Series
·
NTG Industrial Type Cooing Tower Series
·
NECN/NECH Evaporative condenser
·
NWFL Dry Air Cooler
NEWIN manufactures and stocks all major cooling tower accessories to meet maintenance and replacement needs of almost any size and types of cooling tower. Please contact us to customize the cooling tower accessories you need.
CONTAIN:
· Fan drive system (fan/ fan stack/reducer/motor/shaft etc.)
· Water distribution (nozzles/ drift eliminator etc.)
· Heat exchange(PVC infills/ cooling coil etc.)
· Other accessories (air inlet louver/ valve etc.)
Packaging & Shipping
Open type cooling towers shipment
Closed type cooling towers shipment
Audited Supplier 
){kind=link}
){kind=link}