Buy PVC Film Fills for FRP Cooling Towers

• Customization: Available
• Cooling Method: Cooling Tower, Cross Flow
• Certification: ISO, CE, ISO, CTI
• Model NO.: KUH cooling tower fills
• Condition: New, New
• Ventilation Mode: Natural Ventilation
• Air Contact Form: Wet and Dry
• Air Contact Way: Open
• Tower Shape: Square
• Noise Level: Low
• Application Fields: Industrial
• Material: PVC
• Max.Length: Depend on Customer Demand
• Corrugation Height: 28 mm
• Color: Black, Grey
• Installation Method: Hung/Glued
• Continuous Operation Tempperature: 50 Degrees Centigrade
• Max. Application: 60 Degrees Centigrade
• Minimum Order Quantity: 1000PCS
• Used for: Cross Flow Cooling Tower
• Transport Package: by Plywood Pallet/Case/Carton/Container
• Specification: 730/750/930/950 mm
• Trademark: newin
• Origin: China
• HS Code: 3926901000
• Production Capacity: 500000/Year

Product Description

Buy PVC Film Fills for FRP Cooling Towers

KUH series cross flow film fill is sharp horizontal corrugations allow even water redistribution on the sheet and water rotation for good contact with air.  Width with 730mm, 750mm, 930mm, 950mm x any length are available to meet different customers' requirements.

Feaures

- Hanging design type or glue sticked type are available.
- Sharp horizontal corrugations allow even water redistribution on the sheet and water rotation for good contact with air. The offset -- - flute design allows vertical rotation of air with limited pressure drop.
- Adapted to any induced draft or natural draft cooling tower using normal industrial water quality
- Well Long service life with minimal maintenance
- Width with 730mm, 750mm, 950mm, 980mm x any length are available to meet different customers' requirements.

Specification

Model--KUH	PVC
Max.length	Depend on customer demand
Width	730/750/930/950 mm
Continuous operation tempperature	50ºC
Max.applicationtemp. (short term)	60ºC
Color	Black, grey
Corrugation height	20 mm
Installation method	Hung/Glued

Packing and Loading:  LCL shipment: by plywood pallet/case/carton, FCL shipment: by container
Trade Terms: EXW, FOB, CFR,CIF, DDU.
Payment term: T/T, L/C, West Union
Minimum Order Quantity: 1000pcs
 

STRUCTURE & INSTALLATION DRAWING

Newin supply structure & installtion drawing advice with jobsite storage advice and quality control report along with shipment to make attention to customers when they receive the materals. OEM or special mold design also available on request.

APPLICATION & USAGE

Newin MAH Film Fill is applicable for Marley cooling tower series of SKB, with SGS test in ASTM Standards to keep high quality infill to get the high efficienty of the cooling tower. Inform us the tower model or size, we will estimate the Nos of sheets needed for your cooling tower replacing.

 

APPLICABLE COMMERCIAL STANDARDS

Sheets material is strictly followed below SGS test with ASTM standards. Each property or all properties as below tested by your products are also vailable on request.
 

Property	Test Method	Values
Specific Gravity	ASTM D792-13           Method B	1.426g/cm3
Oxygen Index	ASTM D2863-13	34.50%
Tear Strength	ASTM D1004-13	X direction		111N
		Y direction		121N
Tensible Test	ASTM D 882-12	Tensile Strength	X direction	51.1MPa
			Y direction	45.3Mpa
		Elongation at Break	X direction	87%
			Y direction	56%
Values shown above based on SGS Test No.: GZIN1708039662PS by Newin
Statements and methods presented are based upon the best available information and practices known to Newin. Conditions of use may vary and are beyond control, the user should undertake sufficient tests to determine the suitability for any intended use of the material.

 

FILED DATA FOR CROSS FLOW FILM FILL REPLACEMENT

Fill in below measurements data for your maintenance cooling tower or reparing projects demand quality and reliability, count on Newin, site visit or maintenance service, engineered to fit the cooling tower fills or components. 


Packing & Shipment



You may be interested in NEWIN other fills