| Customization: | Available |
|---|---|
| After-sales Service: | Consult Newin Sales Representative |
| Warranty: | Consult Newin Sales Representative |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Dry-Wet Hybrid Cooling Mode
NCFN-GS cooling tower has the capability to adapt its operational modes in response to fluctuations in ambient temperature.Dry Cooling Mode
When the temperature falls below -10ºC or the output temperature is lower than the set point, the spray pump will cease operation and the cooling tower will switch to dry cooling mode. This minimizes water evaporation during cold seasons and provides ice water in certain working conditions as an alternative to refrigeration, resulting in water and energy savings.
Wet Cooling Mode
When the temperature exceeds a specific threshold (-2ºC), or when the output temperature surpasses a predetermined level, the spray pump initiates operation, causing the cooling tower to function in wet cooling mode. Evaporative cooling guarantees substantial cooling capacity.
Water saving, Energy conservation, Environmental protection
> In comparison to conventional wet cooling towers, it has the capability to diminish the utilization of spray water and decrease overall water consumption.
> By implementing intelligent control systems and advanced cooling technology, energy consumption reduction and energy utilization improvement could be achieved, resulting in significant electricity savings.
> Dry-wet hybrid cooling effectively minimize water mist emissions, resulting in a reduced environmental impact and enhanced eco-friendliness.
Operation& Maintenance Cost Saving
> The closed-circuit circulation system guarantees the purity of the cooling medium, minimizes water contamination, and decreases water treatment expenses. Furthermore, dry cooling mode is utilized during winter to significantly reduce the risk of freezing for cooling tower components. This not only lowers equipment operation and maintenance costs but also ensures the long-term stable operation of equipment.
> The product is factory assembly, transported and installed conveniently, ultimately saving valuable time and effort.
Forced Draft Centrifugal Fan Drive System
Big brand centrifugal fan which is licensed to bear the AMCA Seal for air performance, sound, and FEG , featuring wheel blades, and belt pulley driving. It has undergone rigorous static and dynamic tests and is balanced to G2.5 grade, ensuring optimal cooling tower heat transfer performance with minimal noise. Big air volume, flow range from 1000m3h-100000m3h. The exceptional characteristics include robust stability, remarkable efficiency, minimal noise, and reduced power consumption.
Key Parts for Closed Circuit System And Dry-Wet Cooling Modes.
The fluid medium requiring cooling circulates through the fin tube heat exchanger and stainless steel heat exchange coil within the closed circuit system, ensuring cleanliness, reducing water treatment and maintenance expenses, and conserving precious water resources while efficiently cooling.
Fin tube heat exchanger and stainless steel heat exchange coil are not only essential components of closed circuit systems, but also key elements of Dry-wet cooling modes.
Finned Tube Heat Exchanger
Fin tube heat exchanger is constructed with stainless steel tubes and aluminum spiral fins, boasting robust anti-corrosion properties and enhanced stability. The structural design of the fin tube is intended to enhance the heat exchange area, optimize efficiency in heat transfer, facilitate complete air exchange with the fin tube, and ultimately achieve water-saving operation of equipment during both dry cooling and wet cooling stages. It can also effectively eliminate the occurrence of "white smoke" during winter operation of the cooling tower, thus ensuring a favorable working environment for the equipment and prolonging its service life.
Stainless Steel Heat Exchange Coil
The high-quality heat exchange coil utilizes a stainless steel serpentine bending tube and a sturdy framework, ensuring superior thermal performance and full contact with spray water for efficient heat exchange and effective cooling. The stainless steel heat exchange pipes are not only resistant to corrosion, but also lightweight and recyclable.
Optional Various Additional Functions
Two-speed& VFD variable frequency motor/ Vibration Cut-off Switch/ Electronic descaler/ Water treatment equipment/ Anti-freeze automatic heating system/ Noise reduction upgrade/ External maintenance platform and guardrail/Installation and maintenance boom etc.
| Model | Wet Cooling | Free Cooling | Fan Motor | Spray Pump | Total Dimension (without silencer) |
Weight | ||||
| Fluid flow | Cooling capacity | Capacity 12/7/0ºC |
Power | Power | L | W | H | Shipping | Operation | |
| m³/h | kW | kW | kW | kW | mm | mm | mm | kg | kg | |
| NCFN-GS-L-510-F | 66 | 340 | 77 | 5.5 | 2.2 | 4680 | 2200 | 2920 | 3468 | 5184 |
| NCFN-GS-L-510-S | 66 | 340 | 108 | 7.5 | 2.2 | 4680 | 2200 | 3040 | 3636 | 5421 |
| NCFN-GS-L-640-S | 97 | 499 | 111 | 7.5 | 2.2 | 4680 | 2200 | 3240 | 3908 | 5812 |
| NCFN-GS-L-640-E | 97 | 499 | 142 | 11.0 | 2.2 | 4680 | 2200 | 3360 | 4082 | 6041 |
| NCFN-GS-L-1000-F | 119 | 612 | 139 | 15.0 | 4.0 | 6920 | 2200 | 2990 | 5438 | 8061 |
| NCFN-GS-L-1000-S | 119 | 612 | 211 | 18.5 | 4.0 | 6920 | 2200 | 3110 | 5647 | 8213 |
| NCFN-GS-L-1250-S | 175 | 900 | 218 | 22.0 | 4.0 | 6920 | 2200 | 3310 | 5898 | 8698 |
| NCFN-GS-L-1250-E | 175 | 900 | 273 | 30.0 | 4.0 | 6920 | 2200 | 3430 | 6107 | 9019 |
| NCFN-GS-L-1560-F | 225 | 1158 | 206 | 37.0 | 5.5 | 7520 | 2400 | 3190 | 6291 | 9928 |
| NCFN-GS-L-1560-S | 225 | 1158 | 273 | 37.0 | 5.5 | 7520 | 2400 | 3310 | 6534 | 10311 |
| NCFN-GS-L-1560-E | 225 | 1158 | 273 | 45.0 | 5.5 | 7520 | 2400 | 3430 | 6777 | 10694 |
| Note: 1. Standard Design Working Condition: Fluid in/out temperature: 35/30ºC. 2. Standard design ambient wet/dry bulb temperature: 21/31ºC. 3. Above data sheet based on 40% ethylene glycol solution fluid. 4. Please contact NEWIN sales representative if working condition not same as above standard design condition. |
||||||||||
NEWIN FACTORY
Nestled in the vibrant Huizhou, Guangdong, our expansive manufacturing base spans an impressive 10,000 square meters, offering a state-of-the-art environment for innovation and production excellence.
ISO CERTIFICATION
Boasting prestigious ISO certifications, including ISO9001:2015 for Quality Management and ISO14001:2015 for Environmental Management, Newin exemplifies a commitment to superior quality and sustainable practices.
WORKSHOPS
Welding Workshop
Filler Thermoforming Workshop
Sheet Metal Processing Workshop
Cooling Tower Assembly Workshop
Open Type Cooling Towers Shipment: Experience seamless transit with our expertly coordinated shipping solutions, ensuring your equipment arrives on time and in pristine condition.
){kind=link}