| Customization: | Available |
|---|---|
| Cooling Method: | Cooling Tower |
| Certification: | ISO, CE |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
BAD Newin BAIntroducing the Newin Cellular Type Drift Eliminator, an innovative solution designed specifically for efficient cooling tower applications. This remarkable product ensures the removal of minuscule droplets of water that are carried by the exhaust air, thereby significantly reducing any potential nuisance and health concerns that such droplets may cause if they escape through the tower along with the heated air. The BAD series drift eliminators from Newin have been meticulously engineered to create an intricate pathway for the air stream. As the water droplets navigate through this maze, they are compelled to change direction, causing them to collide with the side walls of the drift eliminator. This effectively leads to the coalescence of the droplets, allowing them to drain seamlessly back into the wet section of the cooling tower, ensuring maximum efficiency and performance.
PROPERTIES
| Module Length (Max) | mm | 2440 | ||
| Module Width (Max) | mm | 500 | ||
| Module Height | mm | 140 | ||
| Flute Height | mm | 25 | ||
| Sheet Thickness - Before Forming | mm | 0.45 | ||
| Sheet Thickness - After Forming | mm | 0.38 | ||
| Max. application temp. (short time) - PVC | °C | 60 | ||
| Customized size and thickness available for special request. Contact Newin for details. | ||||
APPLICATION & USAGE
| Property | Test Method | Values | ||
| Specific Gravity | ASTM D792-13 Method B |
1.426g/cm3 | ||
| Oxygen Index | ASTM D2863-13 | 34.50% | ||
| Tear Strength | ASTM D1004-13 | X direction | 111 N | |
| Y direction | 121 N | |||
| Tensible Test | ASTM D 882-12 | Tensile Strength | X direction | 51.1 MPa |
| Y direction | 45.3 Mpa | |||
| Elongation at Break |
X direction | 87% | ||
| Y direction | 56% | |||
| Values shown above based on SGS Test No.: GZIN1708039662PS by Newin | ||||
| Statements and methods presented are based upon the best available information and practices known to Newin. Conditions of use may vary and are beyond control, the user should undertake sufficient tests to determine the suitability for any intended use of the material. |
||||
NEWIN FACTORY
Embark on an inspiring journey to our state-of-the-art manufacturing base, strategically nestled in the thriving industrial hub of Huizhou, Guangdong. Sprawling across an expansive 10,000 square meters, this facility stands as a beacon of innovation, excellence, and technological advancements, showcasing our commitment to quality and innovation in every facet.
ISO CERTIFICATION
We proudly underscore our unwavering commitment to unparalleled quality and environmental stewardship with our prestigious ISO certifications: the ISO9001:2015 Quality Management System Certification and the ISO14001:2015 Environmental Management System Certification. These certifications set the benchmark for excellence, reflecting our dedication to maintaining the highest standards.
WORKSHOPS
Cutting-edge Welding Workshop
Advanced Filler Thermoforming Workshop
Precision Sheet Metal Processing Workshop
Comprehensive Cooling Tower Assembly Workshop
Open type cooling towers shipment: Experience unparalleled assurance with our meticulously engineered open-type cooling towers. Each unit is expertly packaged, ensuring they reach you in pristine condition. We prioritize supreme safety and security by employing only premium materials and strategic packing techniques, forming an impregnable shield against any potential transit damages. Enjoy seamless logistics and rapid delivery, ensuring that your cooling solutions become operational without delay, maximizing efficiency and performance.
){kind=link}