BAC Cross flow cooling tower PVC infill/fill
Newin BAE Series Cross flow PVC Fill is special structure form, not only certain stiffness, but some flexibility. Due to good elasticity, the filler would chatter under the water-drop impact effect lead to some water drop rebound to above for water redistribution. It has the advantages of direct replacement, performance enhancement, and water condition compatibility. Allow various heat loads, flow rates, water quality, and horse power combinations selections.
FEATURES
- Vac formed by anti flaming PVC material, improves thermal performance of the fills by an average of 7.3 % , long service life.
- Easy core inspection : sheet by sheet without dismantling, Easy cleaning : sheet by sheet inside the tower.
- Hanging installation without glue adhesive, BAH infill sheet designed with telescopic fill support integrated eliminators and louvers.
- Self-extinguishing PVC material, impervious to rot and biological attack For temperatures up to 50°C.
PROPERTIES
With different request in BAE cross flow film fill, like length and width, materials or thickness, etc, please inform us your detailed request to get correct solution and offer. Newin could cover all customer requirements. Fill media in flame retardant or anti-bacterial execution are also available on request.
| Module Length (Max) |
mm |
4070 |
| Module Width |
mm |
1330 |
| Module Depth |
mm |
- |
| Flute Height |
mm |
19 |
| Flute Corrugation Angle |
degrees |
- |
| Surface Area |
m2/m3 |
150 |
| Sheet Thickness - Before Forming |
mm |
0.38 |
| Sheet Thickness - After Forming |
mm |
0.35 |
| Max. application temp. (short time) - PVC |
°C |
60 |
| Max.operating temp. (short time) - High temp. |
°C |
80 |
| Customized size and thickness available for special request. Contact Newin for details. |
Structure & Installation Drawing
Newin supply structure & installtion drawing advice with jobsite storage advice and quality control report along with shipment to make attention to customers when they receive the materals. OEM or special mold design also available on request.
APPLICATION & USAGE
Newin BAE Film Fill is applicable for Baltimore cooling tower series of
TXV,
FXT,
S3000,
FXV,
HXI (cooler),
CXV,
HXC (condenser) ,with SGS test in ASTM Standards to keep high quality infill to get the high efficiency of the cooling tower. Inform us the tower model or size, we will estimate the Nos of sheets needed for your cooling tower replacing
Applicable Commercial Standards
Sheets material is strictly followed below SGS test with ASTM standards. Each property or all properties as below tested by your products are also vailable on request.
| Property |
Test Method |
Values |
| Specific Gravity |
ASTM D792-13 |
1.426g/cm3 |
| Method B |
| Oxygen Index |
ASTM D2863-13 |
34.50% |
| Tear Strength |
ASTM D1004-13 |
X direction |
111 N |
| Y direction |
121 N |
| Tensible Test |
ASTM D 882-12 |
Tensile Strength |
X direction |
51.1 MPa |
| Y direction |
45.3 Mpa |
| Elongation at |
X direction |
87% |
| Break |
Y direction |
56% |
| Values shown above based on SGS Test No.: GZIN1708039662PS by Newin |
| Statements and methods presented are based upon the best available information and practices |
| known to Newin. Conditions of use may vary and are beyond control, the user should undertake |
| sufficient tests to determine the suitability for any intended use of the material. |
FILED DATA FOR CROSS FLOW FILM FILL REPLACEMENT
Fill in below measurements data for your maintenance cooling tower or reparing projects demand quality and reliability, count on Newin, site visit or maintenance service, engineered to fit the cooling tower fills or components.
Packing & Shipment
Crystal Chen
*******************************************
Website : http://newinmachine.en.made-in-china.com
http://newinmachine.en.made-in-china.com
Audited Supplier 
){kind=link}
){kind=link}