Mbd Series Cellular Drift Eliminator

• Customization: Available
• Cooling Method: Cooling Tower, Cooling Tower
• Certification: ISO, CE, ISO, CE, ISO, CE
• Model NO.: MBD Series
• Condition: New, New
• Air Contact Form: Dry
• Air Contact Way: Open
• Tower Shape: Square
• Noise Level: Low
• Application Fields: Industrial
• After-Sales Service: One Year
• Warranty: One Year
• Ventilation Mode: Counter Flow
• Material: PVC, PP
• Transport Package: Wooden Case or Container
• Specification: 500/625
• Trademark: NEWIN
• Origin: China
• HS Code: 3926901000
• Production Capacity: 10000sheets/ Day

Product Description

MBD Series cellular Drift Eliminator

Newin MBD celluar drift eliminator removes small droplets of water that are entrained in the exhaust air to minimize the nuisance and health issues that they create if allowed to escape through the top of the tower along with the heated air. MBD series drift eliminators are designed to create a tortuous path for the air stream. When the water droplets move through them, they are forced to change direction and impact the drift eliminator side walls, coalescing and draining back into the wet section of the cooling tower.

 

FEATURES

Durable effectiveness, advanced technology, reasonable design, with good cooling effect.
Economical installation, high separation efficiency.
Superior performance in heat exchange.

Good ventilation, small resistance, strong hydrophilic, large contact area, and good film-forming, easy packing, good heat conductivity, good chemical stability, acid, alkali and organic solvent corrosion, etc.
The staggered ring material form assembling, packing general is 60 ° Angle, polyvinyl chloride (PVC), polypropylene (PP) two kinds of packing material available.
 

PROPERTIES 

With different request in LAN film fill, like length and width, materials or thickness, etc, please inform us your detailed request to get correct solution and offer. Newin could cover all customer requirements. Fill media in flame retardant or anti-bacterial execution are also available on request.

Module Length (Max)			mm	3000
Module Width			mm	500 / 625
Module Depth			mm	-
Flute Height			mm	30 / 33
Flute Corrugation Angle			degrees	-
Surface Area			m2/m3	150
Sheet Thickness - Before Forming			mm	0.32
Sheet Thickness - After  Forming			mm	0.28
Max. application temp. (short time) - PVC			°C	60
Max.operating temp. (short time) - High temp.			°C	80
Customized size and thickness available for special request. Contact Newin for details.

 
Structure & Installation Drawing

Newin supply structure & installtion drawing advice with jobsite storage advice and quality control report along with shipment to make attention to customers when they receive the materals. OEM or special mold design also available on request.

Application & Usage

Newin NSN counter flow film fill is applicable for LiangChi cooling towe series of LDCM, LDC, LDC-EPC, LNCM and other counter flow cooling tower, with SGS test to keep high quality infill to get the high efficiency of the cooling tower. Inform us the tower model or size, we will estimate the Nos of sheets needed for your cooling tower replacing.

APPLICABLE COMMERCIAL STANDARDS

Sheets material is strictly followed below SGS test with ASTM standards. Each property or all properties as below tested by your products are also vailable on request. 

Property	Test Method	Values
Specific Gravity	ASTM D792-13 Method B	1.426g/cm3
Oxygen Index	ASTM D2863-13	34.50%
Tear Strength	ASTM D1004-13	X direction		111 N
		Y direction		121 N
Tensible Test	ASTM D 882-12	Tensile Strength	X direction	51.1 MPa
			Y direction	45.3 Mpa
		Elongation at Break	X direction	87%
			Y direction	56%
Values shown above based on SGS Test No.: GZIN1708039662PS by Newin
Statements and methods presented are based upon the best available information and practices  known to Newin. Conditions of use may vary and are beyond control, the user should undertake  sufficient tests to determine the suitability for any intended use of the material.

  

FILED DATA FOR COUNTER FLOW FILM FILL REPLACEMENT

Fill in below measurements data for your maintenance cooling tower or reparing projects demand quality and reliability, count on Newin, site visit or maintenance service, engineered to fit the cooling tower fills or components.