| Customization: | Available |
|---|---|
| After-sales Service: | Consult Newin Sales Representative |
| Warranty: | Consult Newin Sales Representative |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
ADVANTAGE
Dry-Wet Hybrid Cooling Mode
The NCFN-GS cooling tower is ingeniously designed to seamlessly transition its operational modes to adapt to varying ambient temperatures, ensuring optimal performance and efficiency.Dry Cooling Mode
When temperatures drop below -10ºC or the desired output temperature is achieved, the innovative spray pump halts, allowing the cooling tower to smartly switch to an efficient dry cooling mode. This strategic adjustment curtails water evaporation, providing an alternative to traditional refrigeration by delivering ice water under specific conditions and significantly conserving both water and energy.
Wet Cooling Mode
As temperatures rise above a certain threshold (-2ºC) or the output temperature exceeds set levels, the system activates the spray pump, initiating the wet cooling mode. This mode leverages evaporative cooling to deliver exceptional cooling capacity, effectively managing higher thermal demands.
Water saving, Energy conservation, Environmental protection
> Compared to traditional wet cooling towers, this pioneering solution uniquely reduces spray water usage and overall water consumption, marking a substantial advancement in efficiency.
> Employing cutting-edge intelligent control systems alongside state-of-the-art cooling technology, this system not only curtails energy consumption but also enhances energy efficiency, thereby achieving impressive electricity savings.
> The innovative dry-wet hybrid cooling effectively reduces water mist emissions, minimizing environmental impact and contributing significantly to increased eco-friendly practices.
Operation & Maintenance Cost Saving
> A robust closed-circuit circulation system safeguards the purity of the cooling medium, significantly reducing water contamination and associated treatment costs. Utilizing dry cooling in winter further mitigates the risk of freezing, lowering operational and maintenance expenses, and supporting long-term equipment stability.
> Factory-assembled, this product is designed for effortless transport and installation, saving precious time and labor, streamlining your setup process.
MAIN PARTS
Forced Draft Centrifugal Fan Drive System
Big brand centrifugal fan is licensed to bear the distinguished AMCA Seal for exceptional air performance, sound quality, and FEG. It features state-of-the-art wheel blades and belt pulley driving. Having undergone rigorous static and dynamic testing, it achieves perfect balance at the G2.5 grade. This guarantees unparalleled cooling tower heat transfer performance with the slightest noise levels, delivering an impressive air volume with flow ranges spanning from 1000m3h-100000m3h. Its outstanding features include unparalleled stability, remarkable efficiency, minimal noise, and reduced power consumption.
Key Parts for Closed Circuit System And Dry-Wet Cooling Modes.
The fluid medium that requires cooling circulates seamlessly through the fin tube heat exchanger and stainless steel heat exchange coil within the closed circuit system, ensuring the utmost cleanliness, significantly reducing water treatment and maintenance expenses, while conserving precious water resources with high efficiency.
The fin tube heat exchanger and stainless steel heat exchange coil are not just pivotal in closed circuit systems but are also critical components in Dry-wet cooling modes.
Finned Tube Heat Exchanger
Constructed with stainless steel tubes and aluminum spiral fins, the fin tube heat exchanger boasts superior anti-corrosion properties along with enhanced stability. Its structural design is crafted to maximize the heat exchange area, optimize heat transfer efficiency, and ensure complete air exchange with the fin tube. This ultimately leads to water-saving operations of equipment in both dry and wet cooling stages. Additionally, it effectively eradicates the occurrence of "white smoke" during winter operations of the cooling tower, ensuring a superior work environment for the equipment and prolonging its operational lifespan.
Stainless Steel Heat Exchange Coil
This premium quality heat exchange coil is designed with a stainless steel serpentine bending tube and a robust framework, delivering superior thermal performance with full contact with spray water, ensuring highly efficient heat exchange and effective cooling. Stainless steel heat exchange pipes are not only corrosion-resistant but also lightweight and fully recyclable.
Optional Various Additional Functions
Two-speed & VFD variable frequency motor/ Vibration Cut-off Switch/ Electronic descaler/ Water treatment equipment/ Anti-freeze automatic heating system/ Noise reduction upgrade/ External maintenance platform and guardrail/ Installation & maintenance boom etc.
| Model | Wet Cooling | Free Cooling | Fan Motor | Spray Pump | Total Dimension (without silencer) |
Weight | ||||
| Fluid flow | Cooling capacity | Capacity 12/7/0ºC |
Power | Power | L | W | H | Shipping | Operation | |
| m³/h | kW | kW | kW | kW | mm | mm | mm | kg | kg | |
| NCFN-GS-L-510-F | 66 | 340 | 77 | 5.5 | 2.2 | 4680 | 2200 | 2920 | 3468 | 5184 |
| NCFN-GS-L-510-S | 66 | 340 | 108 | 7.5 | 2.2 | 4680 | 2200 | 3040 | 3636 | 5421 |
| NCFN-GS-L-640-S | 97 | 499 | 111 | 7.5 | 2.2 | 4680 | 2200 | 3240 | 3908 | 5812 |
| NCFN-GS-L-640-E | 97 | 499 | 142 | 11.0 | 2.2 | 4680 | 2200 | 3360 | 4082 | 6041 |
| NCFN-GS-L-1000-F | 119 | 612 | 139 | 15.0 | 4.0 | 6920 | 2200 | 2990 | 5438 | 8061 |
| NCFN-GS-L-1000-S | 119 | 612 | 211 | 18.5 | 4.0 | 6920 | 2200 | 3110 | 5647 | 8213 |
| NCFN-GS-L-1250-S | 175 | 900 | 218 | 22.0 | 4.0 | 6920 | 2200 | 3310 | 5898 | 8698 |
| NCFN-GS-L-1250-E | 175 | 900 | 273 | 30.0 | 4.0 | 6920 | 2200 | 3430 | 6107 | 9019 |
| NCFN-GS-L-1560-F | 225 | 1158 | 206 | 37.0 | 5.5 | 7520 | 2400 | 3190 | 6291 | 9928 |
| NCFN-GS-L-1560-S | 225 | 1158 | 273 | 37.0 | 5.5 | 7520 | 2400 | 3310 | 6534 | 10311 |
| NCFN-GS-L-1560-E | 225 | 1158 | 273 | 45.0 | 5.5 | 7520 | 2400 | 3430 | 6777 | 10694 |
| Note: 1. Standard Design Working Condition: Fluid in/out temperature: 35/30ºC. 2. Standard design ambient wet/dry bulb temperature: 21/31ºC. 3. Above data sheet based on 40% ethylene glycol solution fluid. 4. Please contact NEWIN sales representative if working condition not same as above standard design condition. |
||||||||||
NEWIN FACTORY
Nestled in the vibrant Huizhou, Guangdong, our expansive manufacturing base spans an impressive 10,000 square meters, offering a state-of-the-art environment for innovation and production excellence.
ISO CERTIFICATION
Boasting prestigious ISO certifications, including ISO9001:2015 for Quality Management and ISO14001:2015 for Environmental Management, Newin exemplifies a commitment to superior quality and sustainable practices.
WORKSHOPS
Welding Workshop
Filler Thermoforming Workshop
Sheet Metal Processing Workshop
Cooling Tower Assembly Workshop
Open Type Cooling Towers Shipment: Experience seamless transit with our expertly coordinated shipping solutions, ensuring your equipment arrives on time and in pristine condition.
){kind=link}