| Customization: | Available |
|---|---|
| Cooling Method: | Cooling Tower |
| Certification: | ISO, CE |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Exquisite and Efficient Newin's Premier BA SeriesThe D cellular drift eliminator from Newin is meticulously engineered to enhance the performance of mechanical ventilation systems by expertly removing even the smallest droplets of water entrapped in the exhaust air. This prevents potential nuisances and health concerns that could arise if these droplets were to escape with heated air from the top of the cooling tower. The BAD series drift eliminators are ingeniously crafted to force the air stream through a winding path. This design compels the water droplets to alter their course, striking the drift eliminator's side walls where they coalesce and smoothly drain back into the cooling tower's wet section, ensuring optimal performance and safety.
PROPERTIES
| Module Length (Max) | mm | 2440 | ||
| Module Width (Max) | mm | 500 | ||
| Module Height | mm | 140 | ||
| Flute Height | mm | 25 | ||
| Sheet Thickness - Before Forming | mm | 0.45 | ||
| Sheet Thickness - After Forming | mm | 0.38 | ||
| Max. application temp. (short time) - PVC | °C | 60 | ||
| Customized size and thickness available for special request. Contact Newin for details. | ||||
APPLICATION & USAGE
| Property | Test Method | Values | ||
| Specific Gravity | ASTM D792-13 Method B |
1.426g/cm3 | ||
| Oxygen Index | ASTM D2863-13 | 34.50% | ||
| Tear Strength | ASTM D1004-13 | X direction | 111 N | |
| Y direction | 121 N | |||
| Tensible Test | ASTM D 882-12 | Tensile Strength | X direction | 51.1 MPa |
| Y direction | 45.3 Mpa | |||
| Elongation at Break |
X direction | 87% | ||
| Y direction | 56% | |||
| Values shown above based on SGS Test No.: GZIN1708039662PS by Newin | ||||
| Statements and methods presented are based upon the best available information and practices known to Newin. Conditions of use may vary and are beyond control, the user should undertake sufficient tests to determine the suitability for any intended use of the material. |
||||
NEWIN FACTORY
Embark on an inspiring journey to our state-of-the-art manufacturing base, strategically nestled in the thriving industrial hub of Huizhou, Guangdong. Sprawling across an expansive 10,000 square meters, this facility stands as a beacon of innovation, excellence, and technological advancements.
ISO CERTIFICATION
We proudly underscore our unwavering commitment to unparalleled quality and environmental stewardship with our prestigious ISO certifications: the ISO9001:2015 Quality Management System Certification and the ISO14001:2015 Environmental Management System Certification, setting the benchmark for excellence.
WORKSHOPS
Cutting-edge Welding Workshop
Advanced Filler Thermoforming Workshop
Precision Sheet Metal Processing Workshop
Comprehensive Cooling Tower Assembly Workshop
Open type cooling towers shipment: Our meticulously engineered open-type cooling towers are expertly packaged, guaranteeing they reach you in immaculate condition. We prioritize the utmost safety and security, employing premium materials and strategic packing techniques to provide an impregnable shield against any potential transit damages. Revel in seamless logistics and prompt delivery, ensuring that your cooling solutions become operational without delay for maximum efficiency and performance.
){kind=link}