| Customization: | Available |
|---|---|
| Cooling Method: | Cooling Tower |
| Certification: | ISO, CE |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
RYH Newin RYH Film Fill is a hanging film type cooling tower fill which incorporates highly efficient cellular drift eliminator and molded with the air inlet louver, spreads the water through the thin film, flowing over large vertical surfaces, promoting maximum exposure to air flow to get higher cooling efficiency. This type of fill provides much more water surface exposure per cubic foot than splash type fill.
PROPERTIES
With different request in RYH film fill, like length and width, materials or thickness, etc, please inform us your detailed request to get correct solution and offer. Newin could cover all customer requirements. Fill media in flame retardant or anti-bacterial execution are also available on request.
| Module Length | mm | 1000/1080 | ||
| Module Width | mm | 620 | ||
| Module Depth | mm | - | ||
| Flute Height | mm | 18 | ||
| Flute Corrugation Angle | degrees | - | ||
| Surface Area | m2/m3 | 157 | ||
| Sheet Thickness - Before Forming | mm | 0.32 | ||
| Sheet Thickness - After Forming | mm | 0.28 | ||
| Max. application temp. (short time) - PVC | °C | 60 | ||
| Max.operating temp. (short time) - High temp. | °C | 80 | ||
| Customized size and thickness available for special request. Contact Newin for details. | ||||
APPLICATION & USAGE
Newin RYH Film Fill with SGS test in ASTM Standards to keep high quality infill to get the high efficienty of the cooling tower. Inform us the tower model or size, we will estimate the Nos of sheets needed for your cooling tower replacing.
| Property | Test Method | Values | ||
| Specific Gravity | ASTM D792-13 Method B |
1.426g/cm3 | ||
| Oxygen Index | ASTM D2863-13 | 34.50% | ||
| Tear Strength | ASTM D1004-13 | X direction | 111 N | |
| Y direction | 121 N | |||
| Tensible Test | ASTM D 882-12 | Tensile Strength | X direction | 51.1 MPa |
| Y direction | 45.3 Mpa | |||
| Elongation at Break |
X direction | 87% | ||
| Y direction | 56% | |||
| Values shown above based on SGS Test No.: GZIN1708039662PS by Newin | ||||
| Statements and methods presented are based upon the best available information and practices known to Newin. Conditions of use may vary and are beyond control, the user should undertake sufficient tests to determine the suitability for any intended use of the material. | ||||
More products maybe you are interested in:
NEWIN FACTORY
Embark on an awe-inspiring journey to our cutting-edge manufacturing base, strategically nestled in the bustling industrial heart of Huizhou, Guangdong. Spanning an impressive 10,000 square meters, this state-of-the-art facility shines as a beacon of innovation and excellence.
ISO CERTIFICATION
With an unwavering dedication to unmatched quality and environmental responsibility, we proudly uphold our distinguished ISO certifications: the acclaimed ISO9001:2015 Quality Management System Certification and the renowned ISO14001:2015 Environmental Management System Certification.
WORKSHOPS
Revolutionary Welding Workshop
High-Tech Filler Thermoforming Workshop
Precision-driven Sheet Metal Processing Workshop
Holistic Cooling Tower Assembly Workshop
Open type cooling towers shipment: Our meticulously engineered open-type cooling towers are expertly packaged to ensure they reach you in pristine condition. We prioritize safety and security, using high-quality materials and strategic packing techniques to safeguard against any potential transit damages. Experience seamless logistics and punctual delivery, ensuring that your cooling solutions are operational without delay.
){kind=link}